Westermo TD-23 Instrukcja Instalacji Pobierz pdf (Strona 44)

44 6178-2203

S41 – Bit mapped register (Read Only Register)

Bit Interval Default Description

0..1 0..3 3 Compression selection:

0-No compression (AT%C0)

1-MNP5 (AT%C1)

2-V.42bis (AT%C2)

3-MNP5 or V.42bis (AT%C3)

2 0..1 1 Automatic line quality and fall back/fall forward:

0-Line quality and fall back/fall forward disabled

(AT%E0)

1- Line quality and fall back/fall forward enabled

(AT%E1)

3 0..1 0 Modem-to-modem flow control:

0-No flow control (AT\G0)

1-Modem-to-modem flow control (AT\G1)

4 0..1 0 MNP block or character stream control:

0-Character stream (AT\L0)

1-Blockmode (AT\L1)

5..7 0..7 0 Reserved

S46 – V.42bis Data compression control

136 – No data compression

138 – V.42bis data compression

Default 138 {136,138}.

S48 – V.42 Negotiation Control

0 – Force LAPM connection

7 – Enable negotiation

128 – Force value as specified in S36

Default 7 {0,7,128}.

Please also refer to S36

S82 – Break-control for LAPM connections (Not stored with &W)

3 – Break is sent immediately. Data in the buffer is stored.

7 – Break is sent immediately. Data in the buffer is destroyed.

128 – Break is buffered

Default 128 {3,7,128}.

S86 – Call failure indication (Read Only Register, not stored with &W)

This register contains an indication of what went wrong after a dialling error.

Default 0 {0..255}.

S91 – PSTN Transmit level (Directly stored in NVRAM)

Default 13 Default value and interval is country dependant {0..30} (dBm)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

Brak uwag

Westermo TD-23 Instrukcja Instalacji Strona 44